|
The F10 Oil Separation Flushing
Unit is designed to remove mineral oil from an Auto A/C
system prior to retrofitting to Polyol Ester (POE) or
Poly Alkaline Glycol (PAG) Oils.
The F10 is used in conjunction with
either an Atmos V10, V45, or RR12 Unit and a V45 Unit
in a closed loop flushing cycle using R12 or R22 as a
flushing solvent.
|
- Refrigerant Solvent Types:
R-12, or R-22
- Lightweight and portable
- Adaptable to other makes
of Recovery /Recycle.
- Low maintenance
- Use with either V10,
V45 or RR12 Atmos Units
- Use also with A48 Atmos
Accessory Unit
|
Oil Extraction Rate: 1000
cc/hr
Flushing Flow Rate:
40kg/hr
Connections: Inlet 1/4"
Male Flare.
Outlet: 3/8" Male Flare
Power: 220 / 240
Volt 50 / 60hz
110/115Volt 60hz
Running Current: 1.7 Amp
(220V 50hz)
Dimensions mm:
350H x 330W x 210D.
Weight: 12kg
|
